TB250-2 POWERFUL EARTHMOVER
- STAGE V READY

5 tonne compact excavator with powerful excavating performance.

The TB250-2 compact excavator brings operators the most comfortable operation and powerful digging performance.

Weighing in at 5120kg the TB250-2 excavator offers massive operating
capacity in a compact sized excavator even in the toughest, tightest
working conditions.
Performing with massive bucket breakout force the TB250-2 works
comfortably well above expectations in the 5 tonne weight class.

• 5120kg operating weight

• 3780mm dig depth

• 28kw engine

• Two speed travel

• Electronic engine monitoring

• Air conditioning

STAGE V READY

Powered by a Yanmar 4TNV88C with DPF, to meet Stage V emission regulations. Fuel efficient with automatic idle, dial throttle control with economy work-mode and electronic engine monitoring.

The TB250-2 features 37.2 kN bucket breakout force and 22.9 kN digging arm force – high power for a 5 tonne excavator.
With a massive ground reach of 5985mm and dig depth of 3780mm the new TB250-2 offers lots more on site.

ENHANCED FEATURES

Two way auxiliary hydraulics plumbed to the boom arm allows alternative tools to be used on site.
NEW The TB250-2 comes with factory-fitted hydraulic hitch pipework as standard.
Operating attachments is easy and controlled using the variable slider control on the left hand lever. Auxiliary flows adjustable from the cab control panel
Electric throttle control makes it easy to set the throttle to the desired
position for operation.

The front window easily retracts into the roof (gas-strut assist) and the front base window is easy to remove and store behind the seat. A one piece toughened glass door, improves visibility, and is much cheaper to replace in the event of site damage

OPERATOR COMFORT

The stylish cab comes with a fully adjustable seat and arm rest.
Radio/MP3 socket, drinks holder and additional foot and storage room.
The TB250-2 is fitted with both foot pedal and hand travel lever controls. Operators familiar with larger excavators often prefer traditional foot pedals to hand lever options.
Air conditioning as standard on the TB250-2.

PERFORMANCE

• Two speed tracking and simultaneous cab swing and dig functions all add up to faster working speeds.
• Short pitch rubber tracks add to performance with far less potential for ground damage.
• Emergency shut-off valve, if the boom or dipper cylinder hose for lifting is ruptured, the emergency shut-off valve is activated to prevent the boom or dipper from falling rapidly.
• Overload warning device - if a weight greater than the lifting capacity is applied or lifted, the overload warning device is activated and the horn sounds.

Built for Site

The TB250-2 is built for site, with a strong cast steel wraparound and 100% steel panels. Well positioned hydraulic hoses minimize potential damage and are well protected. Tough components and heavy duty design adds to durability.

TB250-2 SERVICEABILITY

The new styled engine hood and side cover provide unparalleled access to engine and hydraulic components simplifying all aspects of machine maintenance - all accessible at ground level.

The Well positioned hydraulic and fuel tank gauges and hydraulic control valve. Easy access electric refuelling pump as standard with auto shut off, stowed in own compartment. The rear bonnet provides access to the engine service points.

Side-by-side radiator and hydraulic oil cooler ensures fresh cool air reaches each cooler, improving efficiency and component life. The A/C condenser is mounted on a hinged frame - decreasing inspection and cleaning time.

NOW WITH ADDED
TFM - TAKEUCHI FLEET MANAGEMENT

Takeuchi Fleet Management (TFM) is designed to help you better manage your fleet and lower your overall operating costs.
With TFM monitoring you can check the health of your equipment and prevent costly repairs by keeping track of alerts, hours and much more.
MINIMISE DOWNTIME - proactive monitoring increases machine health, reduces risk and keeps machines running.
REMOTE DIAGNOSTICS - reduce service trips by remotely capturing run hours and equipment data.
UTILISATION TRACKING - make decisions based on actual machine use.PROACTIVE MAINTENANCE - schedule maintenance based on machine hours; saving time, parts and money.

For more information or to arrange a viewing.

Office: 01706 220109
Ed Barnes (Lancashire): 07795402982
Cheryl Patefield (West Yorkshire): 07538 582 430